|
The boot shows "invlid partition table",
There are generally 4 situations, and 4 solutions!
1. The partition format of the hard disk and the startup settings of the motherboard BIOS do not match.
For example, the hard disk uses the MBR partition method, and the motherboard hard disk boot method must select legcay.
When the hard disk uses the GUID (GPT) partition method, the hard disk boot method must select UEFI.
Therefore, the solution only needs to select a different hard disk startup method for the hard disk partition method.
2. When the computer has two hard disks or more, the boot sequence of the motherboard changes for some reason,
The solution is very simple, just enter the BIOS and change the original hard disk boot sequence back.
3. This situation may also occur when the U disk is plugged in and turned on.
The solution is to unplug the U disk and turn it on again.
4. The computer is a newly purchased hard drive.
Solution, enter PE to repartition, and then reinstall the system.
|
This post contains more resources
You have to Login for download or view attachment(s). No Account? Register
x
|